escape to paradise margaritaville margarita maker

The solvents can damage the paint or decals on your machine.

Do not use any solvents to remove any stain or spill traces. The last step is to clean the exterior of your machine with a soft, damp cloth. Step 8: Clean the Exterior of the Machine If you add cold liquids and ice to the blending jar and ice reservoir, the abrupt temperature change can cause the glass to crack. Make sure you assemble your machine only after the parts have cooled down, and never use your machine immediately after washing them with hot water. Let them dry naturally, or use a soft cloth to dry all the parts. We thank the cast, crew, musicians and all our presenters. Once the dishwashing cycle is complete, take out all the parts and place them over a clean towel on your kitchen counter. The tour of Jimmy Buffetts Escape to Margaritaville has completed its run. Always use a normal cycle and a mild detergent. You can also wash them with your hand but be wary of the blades.įor the dishwasher, place all the parts in the top rack of your dishwasher, and don’t stack them over each other. You can do this by pulling the handle straight out while holding the unit in place, so it doesn’t move.Īll the parts used in the Margaritaville margarita machine are dishwasher safe. The last step in taking apart your machine is to remove the ice melt reservoir. Wash it with an eco-friendly dishwashing soap, gently wipe it with a soft and clean cloth, and place it in a safe place. You may notice slight slipperiness if you haven’t cleaned it recently. Your gasket will be wet from operation and jar washing. Once you have the blending jar in your hand, remove the base of the jar by twisting it. Step 5: Unhook the Blending Jar Base, Gasket, and Blade Twisting the jar can result in damaging the base, and it can lead to leaks during operation. It is best to lift the jar and not twist it. You may need to move it back and forth to remove it, but all of this must be done gently. Make sure you lift it gently, don’t exert too much pressure, and avoid twisting the jar. You will need to lift the spigot to remove the blending jar. The next step is to take out the glass jar. Move the shaving blade assembly nut to the left to loosen it, and then remove the shaving blade and keep it in a safe place.

Escape to paradise margaritaville margarita maker